Administrator's Guide

Fine-tuning the Projector
75
Capturing Images
You can save a projected image on the memory card for display at a
later time, as described below. You can also capture an image and set it
to be used as your startup screen, as the screen displayed when the
projector isn’t receiving a signal, or as the screen you see after pressing
the
A/V Mute
button; see the next page for instructions. The image
can be a company logo, slogan, photograph, or any other image you
want to use.
Capturing an Image on the Memory Card
To save an image on the memory card, start by displaying the image
you want to use. It can be from any connected device, such as a
computer, DVD player, or digital camera. (But if you switch to
EasyMP.net, you have to use EasyMP’s capture function; see the
User’s Guide for details.) Follow these steps:
1. Press the
Menu
button on the control panel or remote control.
You see the menu screen.
2. Highlight the
Capture
menu, then press
Enter
.
3. Make sure
Image Capture
is highlighted and press
Enter
.
4. When you see the message “Do you save the present image to the
Memory Card?” select
Yes
and press
Enter
.
5. On the next screen, select
Yes
again and press
Enter
. After a
moment, the projector displays the name of the captured image
(1.jpg, 2.jpg, etc.).
User's Logo Capture
Execute
Image Capture
Execute
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter