Administrator's Guide

76
Fine-tuning the Projector
6. Press
Esc
to exit the menu system.
The image is saved in the Capture folder on the memory card. You
can display it using Easy View or Easy Review, or copy it onto
computers connected to the network using the EasyMP software. See
the User’s Guide for details.
Creating Your Own Startup Screen
Start by displaying the image you want to use. It can be from any
image source, such as a computer, DVD player, or digital camera, or
even a screen that’s shown when you have EasyMP.net turned on.
Note that you don’t have to have a memory card installed to save the
image. Follow these steps:
1. Press the
Menu
button on the control panel or remote control.
You see the menu screen.
2. Highlight the
Capture
menu, then press
Enter
.
3. Select
User’s Logo Capture
and press
Enter
.
4. When you see the message “Do you use the present image as a
user’s logo?” select
Yes
and press
Enter
. A selection box appears
over the image.
5. Use the arrow buttons on the control panel or the
Enter
button
on the remote control to select the area of the image you want to
use. Then press
Enter
.
6. When you see the message “Do you use this image?” select
Yes
and press
Enter
.
User's Logo Capture
Execute
Image Capture
Execute
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter