Administrator's Guide

78
Fine-tuning the Projector
Customizing Projector Features
You can use the Setting menu to disable the projector’s sleep mode,
adjust the image shape, and customize several other features.
1. Press the
Menu
button.
2. Highlight the
Setting
menu, then press
Enter
.
3. Use the arrow buttons (control panel) or the
Enter
button
(remote control) to set the following options:
■
Keystone
Corrects the shape of an image that’s no longer square after
raising the projector.
■
P in P
Selects the source used by the picture-in-picture display
(standard composite video or S-Video).
■
No-Signal Msg.
Selects a screen color or image to display when the projector is
not receiving a signal. The logo setting displays an image that
you have transferred to the projector (see page 76).
■
Prompt
Turns off the identifying text that appears briefly when you
switch picture sources. (It’s best to leave this on.)
Keystone
P in P
No-Sigual Msg.
Prompt
A/V Mute
BNC
Sleep Mode
Reset
Execute
:
:
:
:
:
:
:
0
OFF Black
ON OFF
Blue
Black Blue
RGB YCbCr
ON OFF
Logo
Logo
Composite S-Video
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter