Administrator's Guide

80
Fine-tuning the Projector
3. Use the arrow buttons (control panel) or the
Enter
button
(remote control) to set the following options:
■
Language
Select from 9 languages to be used for the projector menus.
(The EasyMP.net screens can be displayed only in English,
French, and German.)
■
Startup Screen
Turn on to display your captured image or logo whenever the
projector starts. (See page 76 for more information.)
■
Color Setting
Adjusts the color temperature of the projected image. Select
Auto
to let the projector automatically adjust the color
setting. Select
Manual
to adjust the setting yourself, then
press
Enter
.
You can adjust the color using either Absolute Color
Temperature or RGB color values. Positive color values
provide a cold white; negative values a warmer white.
Use the Black and White level settings to adjust projectors
arranged in a stack formation.
■
Rear Proj.
Turn on to project from behind onto a transparent screen.
■
Ceiling
Turn on when the projector is mounted upside-down from
the ceiling.
4. When you’re finished, press
Esc
.
Viewing Lamp Usage and Other
Information
Use the About menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
1. Press the
Menu
button. You see the main menu.
2. Highlight the
About
menu.
note
You can view the lamp-on
time from a remote computer
using the About menu in
EMP Link V (page 64) or
the Information option in
Easy Menu (page 65).