Administrator's Guide

86
Maintaining and Transporting the Projector
Before removing the filter, make sure the projector is on its side
(not upside down) to prevent dust from falling inside. Then pull
up on the tab as shown to remove the filter.
Replacing the Lamp
The projection lamp typically lasts for about 2000 hours of use. It is
time to replace the lamp when:
■
The projected images get darker or start to deteriorate.
■
The projection lamp light is flashing red or orange.
■
The message
LAMP REPLACE
appears on the screen when the
projector lamp comes on (after about 1900 hours of use). To
maintain projector brightness and image quality, replace the lamp
as soon as possible.
Contact your dealer or call EPSON at [phone] in the United
States and Canada for a replacement lamp. Request part number
ELPLP11
.
note
You can check in the
p
rojector’s About menu
to see how long the
lamp has been used (see
p
age 80). Or you can
check from a remote
PC using Easy Menu as
described on page 65.