® ® Epson PowerLite Cinema 200+ Home Theater Projector User’s Guide
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.
Contents Introduction 7 Registration and Warranty Projector Parts Projector Controls 7 8 9 Optional Accessories Using This Manual Getting More Information 10 10 10 Setting Up the Projector 11 Choosing a Location Connecting the Cables Other Connections 11 13 14 Basic Operation 17 Turning On the Projector Turning Off the Projector Selecting the Image Source Choosing the Aspect Ratio Choosing the Color Mode Displaying and Adjusting the Image Focusing and Zooming the Image Selecting the Input Signal
Making Adjustments 25 Using the Menu System Changing How the Menu Displays Adjusting the Image Quality Brightness and Contrast Settings Sharpness and Picture Quality Settings Color Settings Adjustments for Computer Images Saving and Resetting Menu Selections Creating Memory Settings Resetting the Projector Adjusting the Image Size Setting Screen Display Options Selecting Other Projector Options 25 26 27 27 28 29 30 31 31 32 33 34 34 Using Cinema Color Editor 37 Setting Up Your Computer System Requi
Maintenance 49 Cleaning the Lens Cleaning the Projector Case Changing the Remote Control’s Batteries Cleaning and Replacing the Air Filter Replacing the Lamp Resetting the Lamp Usage Timer Storing the Projector Transporting the Projector 49 49 50 51 52 53 54 54 Problem Solving 55 What To Do When the Lights Flash Checking the Projector Status Solving Picture Problems Solving Remote Control Problems Where To Get Help 55 56 57 60 61 Specifications 63 General Lamp Remote Control 63 63 63 Dimensions
Notices 69 Important Safety Information Remote Control Information FCC Compliance Statement Declaration of Conformity Epson America, Inc.
Introduction The Epson® PowerLite® Cinema 200+ projector lets you enjoy theater-quality images in the relaxing environment of your own home.
Projector Parts Vertical lens shift knob Control panel Horizontal lens shift knob Lamp cover Lens cover Ventilation slots Infrared receiver Adjustable foot S-Video port Input B (computer VGA port) Input A (component video) Control (RS-232C) port USB port Infrared receiver D4 port (not used in the U.S.
Projector Controls Menu navigation buttons Focus button Menu button Displays the on-screen menu Source button Switches between equipment connected to the projector Indicator lights Power button Aspect button Changes the picture’s aspect ratio Zoom button Esc button Exits the current menu item Keystone correction buttons Corrects the shape of a non-rectangular image On/Off buttons Menu button Displays the on-screen menu Memory button Recalls custom picture settings Color Mode button Optimizes viewing
Optional Accessories Epson provides the following optional accessories for the projector: Product Part number Replacement lamp (ELPLP28) V13H010L28 Air filter replacement (ELPAF04) V13H134A04 Ceiling mount ELPHB01 Kensington security lock ELPSL01 S-Video cable ELPSV01 You can purchase many of these accessories from your dealer, by calling Epson at (800) 873-7766, or by visiting the Epson StoreSM at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.
Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display and adjust the image. Choosing a Location You can install the projector for various viewing setups, as shown below. Front/Ceiling Front Rear/Ceiling Rear If you install the projector in a rear or overhead position, you’ll need to flip and/or mirror the image by selecting the correct Projection option (see page 22).
If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift knob to center the image. Do not place the projector farther to the left or right than the edge of the screen, or you will not be able to project a square (or rectangular) image. Vertical lens shift knob Horizontal lens shift knob The maximum size of the image is determined by the distance from the projector’s lens to the screen.
Connecting the Cables You can connect the projector to any type of video equipment, such as a VCR, DVD player, HDTV tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple® Macintosh system.
Connect your video or computer equipment to these ports: Connect a computer to this port D4 port (not used in the U.S.) Connect video equipment to any of these ports If you connect to the Input A port, be sure to select the correct Input Signal setting for your equipment, or the image may not display properly (see page 21). Other Connections ■ Power cable Plug the power cable into the projector and a grounded electrical outlet.
■ Trigger out port This port outputs a 12-volt DC signal when the projector is turned on. This lets a central control system monitor whether the projector is on or off. It can also be used to raise or lower your projection screen automatically when the projector is in use. Connect to it using a 3.5-mm mini jack cable, as shown.
Basic Operation Make sure the projector is set up as described on page 11, then follow the instructions below to turn it on and display an image. Turning On the Projector 1. Remove the lens cap. 2. Press the On button on the remote control or press the Power button on the projector. Turn on the projector The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on the next page.
Turning Off the Projector To turn off the projector, press the Off button on the remote control or press the Power button on the projector twice. Let the projector cool while the Ppower light flashes red (about 30 seconds). Once the light stops flashing and stays on, it’s safe to unplug the projector. Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce its overall life.
Choosing the Aspect Ratio Composite and S-Video signals are sized automatically to fit on your screen when Auto is selected as the Aspect setting. If you’re viewing a component video signal, you may need to change the size of the image (or aspect ratio) by pressing the Aspect button on the remote control. ■ If your video source is connected to the projector’s Video or S-Video port, select Auto to automatically display your image in the correct size.
Choosing the Color Mode You can change the Color Mode to automatically adjust the brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input source, which is useful if you view different types of images from different sources.
Focusing and Zooming the Image To adjust the sharpness or size of the image: Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the Pattern button on the remote control, then select Cross-hatching. 1. Press the Focus or Zoom button on the projector or remote control. You see this screen: 2. Use the arrow buttons to adjust the image sharpness or size. Note: If you use the remote control, you can stand close to the screen while focusing the image.
Inverting and Mirroring the Image If the image is displayed upside-down or backward, change the Projection option: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Setting menu, then open the Screen menu and select Projection. Menu button 3. Choose from these options: ■ Front if the projector is located in front of the screen (for example, on a table).
Performing Keystone Correction If the projected image looks like or , use the Keystone function to correct its shape. Note: If the image is shaped like or , the projector has been placed off to the side of the screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift knob to center the image. To perform keystone correction: 1. Press the Menu button on the remote control. 2.
Locking the Projector The projector includes various Lock settings to prevent the image from being accidentally changed once it’s adjusted, and to keep children from turning on the projector without adult supervision. To access the Lock settings, follow these steps: 1. Press the Menu button on the remote control. 2. Use the menu navigation buttons to open the Setting menu, then open the Operation menu and select Lock Setting. Menu button 3.
Making Adjustments You can use the projector’s on-screen menus to adjust the image quality, such as the brightness, contrast, sharpness, and color. You can also change how the menus display, select sleep mode settings, and control other projector features. Using the Menu System You can access the menu system either from the remote control or the projector’s control panel to adjust any of the settings described in this chapter.
Changing How the Menu Displays Use these options to control how the menu displays on the screen. ■ Language Setting Æ Language Select from nine languages to use in the menu system. ■ Menu Position Setting Æ On-Screen Display Æ Menu Position Use the arrow buttons to choose a position on the screen for displaying the menu. ■ Navigation Bar Setting Æ On-Screen Display Æ Navigation Bar Select whether to display the navigation bar, which tells you which buttons to push.
Adjusting the Image Quality Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 20. The Color Mode adjusts various settings to approximately correct levels, simplifying your adjustment of the picture. Most image quality settings are saved independently for each input source (Video, S-Video, Input A, Input B).
■ White Level/Black Level Image Æ Picture Quality Æ Input Adjustment Æ White Level/Black Level Adjust the White Level so that details in the brightest parts of the image are not washed out. Then adjust the Black Level so that shadow-level details are still visible in the darkest parts of the image. Sharpness and Picture Quality Settings If the image looks fuzzy, or it contains noise or flickering, you can use these settings to correct it.
Color Settings If the image colors don’t look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the last two settings. Note: You can also make color adjustments by attaching a PC or laptop to the projector and using the Cinema Color Editor software. See page 37.
Adjustments for Computer Images In addition to the settings described above, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself. ■ Auto Setup Image Æ Auto Setup Leave this setting on so that the projector automatically adjusts the tracking, sync, and position of the image.
Saving and Resetting Menu Selections Once you’ve adjusted the picture settings, you can save them as a group using the Memory feature. This lets you easily recall them and switch from one group of settings to another. You can save up to six groups of settings. If necessary, you can use the projector’s reset options to restore its factory-default (original) settings. You can clear all the settings or just the settings in a specific menu.
Resetting the Projector If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings. To restore the settings in a specific menu (such as the Image or Setting menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu: Open the Image menu . . . . . .
Adjusting the Image Size Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 19). ■ Output Scaling Setting Æ Advanced Æ Output Scaling For standard video formats, this setting lets you see the edges of the image that are not normally visible in the picture. Select Larger to view component video and RGB video at 100% size and composite video and S-Video formats at 95%. (Normal displays images at 92% size.
Setting Screen Display Options ■ Message Setting Æ On-Screen Display Æ Message Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the text that appears when you switch between image sources or color modes). ■ Background Color Setting Æ On-Screen Display Æ Background Color Changes the screen that’s used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection.
■ Input Signal Setting Æ Input Signal Adjust these settings for the type of equipment connected to the projector: Video Signal: Leave this setting on Auto so the projector can automatically interpret the picture (only affects images displayed through the Video or S-Video port). Input A: Change this setting to match the type of equipment connected to the Input A port. If necessary, check the label on your equipment to match the setting.
Using Cinema Color Editor You can use the Cinema Color Editor software that came with your projector to adjust each color in the picture individually. You can also use the software in place of your remote control, letting you switch image sources, adjust the picture’s aspect ratio, or change image quality settings right from your computer. Setting Up Your Computer Before using Cinema Color Editor, follow the instructions in this section to install the software and connect the projector to your computer.
Installing the Software Before you begin, make sure that the projector is not connected to your computer. Then follow these steps to install the software: 1. Insert the Cinema Color Editor CD-ROM in your computer. 2. Turn off any anti-virus software that may be running, then click Continue. 3. Read the license agreement and click Agree. You see this screen: Not shown for Macintosh 4. Click Install and follow the on-screen instructions to perform the installation.
Connecting to the Computer Before you begin, make sure you have already installed all the software from the CD-ROM. Then follow these steps to connect the projector to your computer: 1. Connect the projector to your computer using either a USB cable (included with your projector) or an RS-232C (serial) cable. Note: You can use any standard (commercially available) USB or serial cable. Connect either a USB or RS-232C (serial) cable 2. Turn on the projector. 3.
Using Cinema Color Editor To start Cinema Color Editor, follow these steps: 1. Make sure the projector is connected and turned on, as described on page 39. 2. Windows: Click Start, Programs, EPSON Projector, and double-click Cinema Color Editor. Macintosh: From the Applications folder on your hard drive, open the CCEditor folder and double-click Cinema Color Editor. You see this screen: Select your projector . . . . . .
3. Select the name of the projector you want to adjust, then click Connect. You see this screen: Now you can control the projector and adjust its settings as described on the following pages.
Performing Remote Control Operations You can use Cinema Color Editor to change the image source, adjust the aspect ratio, or turn the power off—just as you would from the remote control. 1. Click the Remote Control button. Select Remote Control Turn off the power Change the image source (see page 18) Adjust the aspect ratio (see page 19) 2. Click the buttons as necessary for the operations shown above.
Adjusting the Picture Quality You can use Cinema Color Editor in place of the projector’s menu system to adjust the image quality. 1. Click the Picture Quality button. Select Picture Quality Click one of these buttons to access additional settings 2. Click one of the buttons shown above to access additional settings. See the referenced page number below for details on using each setting: Button Available adjustments Page reference Input Adjustment Brightness Color Intensity Tint Sharpness Color Temp.
Adjusting the Color You can use the Cinema Color Editor to fine-tune the color of the image. If you select RGB as the color mode, you can adjust the offset, gamma, and gain for each signal color (red, green, and blue). If you select RGBCMY, you can adjust the hue and saturation for each of the six colors. 1. Click the Picture Quality button, then click Adjustment of image. Select Picture Quality Click Adjustment of image Select the color mode Click Adjust 2.
Saving and Recalling Picture Settings Once you’ve adjusted the picture using Cinema Color Editor, you can save your settings in the projector’s memory. Then you can use the remote control (or Cinema Color Editor) to easily recall them for future use. To save your settings on the projector: 1. Select Picture Quality, then click Memory management and choose Register. Select Picture Quality Click Register Click Memory management 2.
To use a memory setting you’ve saved on the projector: Access the projector’s memory settings either from the remote control (see page 31) or by using Cinema Color Editor as follows: 1. Select Picture Quality, then click Memory management and choose Select. Select Picture Quality Click Select Click Memory management 2. Click the tab where the setting you want to use is stored (Standard or Advance). Select Standard or Advance Select the setting you want to use Click Select 3.
Managing Your Settings In addition to your projector’s twelve memory settings (six standard and six advanced), you can store any number of settings on your computer’s hard drive. You can also use Cinema Color Editor to rename or delete memory settings stored on your projector. To save or recall settings on your computer: In Cinema Color Editor, open the File menu, then choose one of the following: ■ Save setting to store the current Cinema Color Editor settings on your computer’s hard drive.
Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also need to clean the air filter periodically to prevent overheating. Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely.
Changing the Remote Control’s Batteries The remote control uses two AA batteries. If you suspect they are weak, take the remote control to a darkened room and press the illumination button. If the buttons on the remote control do not glow red, replace the batteries as described below. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Remove the old batteries and insert new AA batteries as shown. 3.
Cleaning and Replacing the Air Filter Clean the air filter on the bottom of the projector after every 100 hours of use. If it’s not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. 1. Turn off the projector and wait for the P power light to stop flashing. 2. Unplug the power cord and disconnect any cables. 3. Turn the projector over.
Replacing the Lamp The projection lamp lasts for up to 3000 hours (in low brightness mode) or 1700 hours (in high brightness mode). You can use the Info menu to check how long it’s been in use (see page 56). It’s time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■ The projector’s warning light flashes red at half-second intervals. ■ The message Replace the lamp appears on the screen when you start projecting.
5. Loosen the two screws securing the lamp. 6. Grasp the lamp as shown and pull it straight out. 7. Gently insert the new lamp and tighten its screws. Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 8. Replace the cover and tighten its screws. (The projector won’t work if the lamp cover is open or loose.) 9. Reset the lamp usage timer, as described in the next section.
Storing the Projector If you need to store the projector for an extended time, do the following: 1. Make sure the temperature and humidity of the storage area are within the recommended range for the projector (14 to 140 °F [–10 to 60 °C] and 10 to 90% relative humidity). 2. Attach the lens cover and retract the feet. 3. Remove the batteries from the remote control. 4. Pack the projector in its original packaging or equivalent.
Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs. If the projector isn’t working correctly, first turn it off, let it cool, and unplug it. Then plug the power cord back in and turn on the projector.
The warning light is flashing orange. High-speed cooling is in progress. If the projector gets too hot again, projection stops automatically. Make sure there is plenty of space around and under the projector for ventilation. Clean or replace the air filter if necessary (see page 51). The warning light is red. The projector is too hot, which turns off the lamp automatically. Let it cool for five minutes, then turn it back on.
Solving Picture Problems You cannot turn on the projector. ■ Make sure the power cord is connected, then wait a moment for the P power light to turn orange before pressing the Power button. ■ If you’ve set the Key Lock, the control panel buttons are disabled; you must use the remote control to turn on the projector (see page 24). ■ If you’ve set the Child Lock, use the remote control or press and hold the Power button on the projector for at least 3 seconds to turn it on (see page 24).
utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the setting varies from computer to computer; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display or enabled. See your computer manual or online help for details. If you’re using a Macintosh with OS X: 1. Select System Preferences from the Apple menu and click Displays. 2. Click Detect Displays. 3.
The picture is upside-down or reversed. Change the Projection setting in the menu system (see page 34). Only part of the picture is displayed, or the picture is distorted. ■ Press the Aspect button to select a different aspect ratio (see page 19). ■ If the Aspect is set to Zoom, you may need to use the Zoom Caption option to see the top or bottom section of the screen (so that subtitles are visible). See page 33. ■ Check the Output Scaling to make sure it’s adjusted correctly (see page 33).
The picture is blurry. ■ Make sure the Input Signal is set correctly for your video equipment (see page 35). ■ There may be dirt on the lens. Clean the lens as described on page 49. ■ Adjust the focus (see page 21). ■ Make sure the lens is not fogged by condensation. If you’ve just moved the projector from a cold environment, wait a couple of minutes before using it. ■ Adjust the Sharpness setting (see page 28).
Where To Get Help Epson provides technical assistance 24 hours a day at http://support.epson.com. Here you can access troubleshooting information, download product documentation, and receive technical advice through e-mail. To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector. This is the fastest way of speaking to a live representative, and it’s free.
Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.7 inch (18 mm) wide Lens F=2.1 to 2.8, f=21.4 to 31.7 mm Resolution (native format) 1280 × 720 pixels, 720p Brightness 1500 ANSI lumens maximum (Dynamic/Living Room color mode) Color reproduction 24 bit, 16.8 million colors Contrast ratio 1000:1 Image size 30 to 300 inches (0.76 to 7.6 m) Projection distance 2.9 to 37 feet (0.9 to 11.3 m) Zoom ratio 1:1.
Dimensions Height 4.5 inches (114 mm) Width 17.3 inches (440 mm) Depth 12.6 inches (320 mm) Weight 11.8 lb. (5.3 kg) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 VAC, 3.0 A 200 to 240 VAC, 1.4 A Power consumption Operating: 270 W max. Standby: 0.
Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-Video, or component video—which it accepts through the Video, S-Video, and Input A (Component) ports, respectively. The projector also supports digital video (SDTV, HDTV) and various monitor display formats.
Aspect Ratio Settings Images can be automatically resized to display at the projector’s native resolution (1280 × 720) when the Aspect setting is set to Auto. If necessary, you can select a different Aspect setting to optimize the image (see page 19). The resolution at which the image displays for a given setting depends on the currently active picture source, as listed below.
Computer monitor formats (analog RGB) Aspect setting Format Normal Zoom Squeeze Through Squeeze Through VGA 960 × 720 1280 × 720 1280 × 720 640 × 480 853 × 480 VESA 960 × 720 1280 × 720 1280 × 720 640 × 480 853 × 480 SVGA 960 × 720 1280 × 720 1280 × 720 800 × 600 1066 × 600 XGA 960 × 720 1280 × 720 1280 × 720 — — SXGA 960 × 720 1280 × 720 1280 × 720 — — MAC13” MAC16” MAC19” MAC21” 960 × 720 960 × 720 960 × 720 954 × 720 1280 × 720 1280 × 720 1280 × 720 1280 × 720 1280
Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■ Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.
■ This product includes a lamp component that contains mercury (Hg). Please consult your state and local regulations regarding proper disposal or recycling, and do not place in the trash. ■ Unplug the projector during lightning storms or when not in use for extended periods. ■ Don’t place the projector or remote control on top of heat-producing equipment. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Located at: EPSON AMERICA, INC. 3840 Kilroy Airport Way MS 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
product. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty. However, each replacement lamp carries the limited 90-day warranty stated above. What This Warranty Does Not Cover: This warranty does not apply to refurbished or reconditioned products. This warranty covers only normal consumer use in the United States and Canada. 24-hour-per-day use causes unusual strain and is not considered normal use.
Index A Accessories, 10, 61 Adjustment pattern, 21 Air filter cleaning and replacing, 51 ordering, 10 Anti-theft device, 8, 10 Aspect button, 9, 19, 59 Aspect ratio, selecting, 19, 66 to 67 Contrast ratio, 63 Contrast setting, 27 Control panel, projector, 9 D Declaration of Conformity, 72 Documentation, 10 E B Background Color setting, 34 Batteries, changing, 50 Blank button, 9, 18 Blurry picture, 60 Brightness setting, 27 specification, 63 Electrical requirements, 64 Epson accessories, 10, 61 Home Serv
I M Image adjusting, 20 to 23, 27 to 30, 43 to 44 changing aspect ratio, 19, 66 to 67 positioning, 22, 33 resizing, 19, 33 selecting source, 18 upside-down or backwards, 22 Image problems, 57 to 60 Info menu, 56 Input Signal setting, 21, 35 Interference, signal, 28, 59 Interlaced mode setting, 28 Memory button, 9, 31 Memory settings creating, 31, 45 deleting, 32, 47 renaming, 47 using, 31, 46 Menu button, 9, 25 Menus available settings, 26 to 35 customizing, 26 using, 25 Message setting, 34 Moving projec
Projector checking status, 56 cleaning, 49 control panel, 9 dimensions, 64 feet, 22 lights, 55 to 56 locking, 8, 10, 24 menus, 26 to 35 parts, 8 positioning, 11 to 12 resetting menu options, 32 storing, 54 transporting, 54 turning on and off, 17 to 18, 57 Source buttons, 9 Source, selecting image, 18 Specifications compatible video formats, 65 electrical, 64 environmental, 64 general, 63 lamp, 63 remote control, 63 Squeeze mode, 19 Startup screen, selecting, 34 Static, 59 Storing projector, 54 Support, see
Z Zoom adjustment, 21 Zoom Caption setting, 19, 33 Zoom setting, 19 78
