Notice

ManualsBrandsEpson ManualsPrintersEpson PowerLite Pilot 2 (ELPCB02)

English

Before use

Thank you very much for purchasing this product.

This product is an interface box called "Connection & Control Box" for EPSON short

throw projectors.

For your safety, read the attached documents carefully to use this product correctly.

After you have read all instructions, keep this information for later reference.

The following symbols are used to show dangerous operation or handling. Make

sure you understand them before reading the guide.

Notes on Installation

Safety Instructions

Warning

This symbol indicates information that, if ignored,

could possibly result in serious personal injury or

even death due to incorrect handling.

Caution

This symbol indicates information that, if ignored,

could possibly result in personal injury or physical

damage due to incorrect handling.

Warning

v When installing this product, keep the enough strength of the wall. Do not

install the product to a wall at an angle or an unstable wall.

Otherwise, the product may fall and cause injury.

EPSON takes no responsibility for any fall accident due to strength poverty

of the wall or fixture for the product.

v Do not set up the product in places where there is a lot of humidity or dust,

near cooking or heating appliances, may come in contact with oily or

cigarette smoke, or steam.

v Do not set up the product in places where it might be subjected to vibration

or shock.

Otherwise, the screws may be loosen and the product may fall and cause

injury.

v Do not apply threadlocker, lubricant or oil to the attachment area of the

product.

Otherwise, the housing or fixing part may crack and the product may

malfunction. Or the product may fall and cause injury.

Caution

v Secure the product without any gap against the wall. Make sure the

screws are not secured at an angle. Check if the screws are tightened

firmly.

Summary of content (5 pages)

PAGE 1
English Safety Instructions Before use Thank you very much for purchasing this product. This product is an interface box called "Connection & Control Box" for EPSON short throw projectors. For your safety, read the attached documents carefully to use this product correctly. After you have read all instructions, keep this information for later reference. The following symbols are used to show dangerous operation or handling. Make sure you understand them before reading the guide.
PAGE 2
Notes on Usage Warning v Do not place any containers with water, chemical liquid and such in them on top of the product. v Do not stand on the product or place heavy objects on it. Doing so may damage the product. v Do not insert or drop any piece of metal, the flammable or foreign objects into the slits on the product. v Do not open any covers on the product except as specifically explained in the attached documents, and do not attempt to disassemble or modify the product.
PAGE 3
English Warning v Do not use the AC adapter in a small space, or cover it with a cloth and such. Otherwise, the AC adapter may become hot and may be deteriorated. Caution v Be sure to turn off the main power switch after use. v Clean the product periodically. If the product has not been cleaned for a long time, dust may build up and it may cause fire or electric shock. v Disconnect all cables from the product before cleaning.
PAGE 4
DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-981-3840 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
PAGE 5
English FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.