Operation Guide

An e-mail notifying the operator of a problem/warning/status is issued
42
The details contained in the e-mail message can consist of the following.
Message Remedy
Easy Interactive
Function Error
Stop using the projector, disconnect the power
cable from the electrical outlet, and contact Epson.
See your User's Guide for more information.
Internal Error
Fan error
Sensor error
Lamp Cover Open See your User's Guide for more information.
Lamp failure at power
on
*
Lamp Error
*
Supply System Error
(Ballast)
*
Stop using the projector, disconnect the power
cable from the electrical outlet, and contact Epson.
See your User's Guide for more information
High internal
temperature error
Low air flow error
Air filter air flow
sensor error
Cinema filter error
Shutter error
Cooling system error
(Peltier element)
Cooling system error
(pump)
Auto Iris Error
High-temperature
warning
See your User's Guide for more information.
Replace Lamp
*
Supply System Error
(Ballast)
*
Replace Air Filter
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Cinema filter warning
Shutter warning
Clean Air Filter Notice
Exhaust vent shutter
error
Obstacle Detection
Error
Obstacle Detection
Warning
Low air flow error
High internal
temperature error
Other warning
Other error
No signal No image signals are being received by the
projector. Check the connection status and check
that the power for the connected equipment is
turned on.
Message Remedy