Operation Guide

An e-mail notifying the operator of a problem/warning/status is issued
43
* When the projector has 2 lamps, the additional information, such as (Lamp
1) or (Ballast 1), is displayed after the message so that you can know which
lamp has problems/warnings.
Messages to inform that the projector has recovered from the error or
warning statuses are sent.
Network error (TCP
connection error)
Check the following items.
Check that the projector's power is turned on.
Check that the LAN cable is connected.
Check that Standby Mode is set to Communication
On (or Network On) or Network Monitoring is set to
On in the projector's configuration menu.
See your User's Guide for more information.
Network error
(ESC/VP.net
communication error)
Check that the projector has been correctly
connected to the network. See your User's Guide for
more information.
Network error
(Monitor Password
authentication error)
Check the projector's Monitor Password.
Message Remedy