User`s guide

Fine-Tuning the Projector 75

Customizing Power and Operation

You can use the Extended menu to customize the way the projector

displays images, enable Direct Power On, turn sleep mode on or off,

and customize other projector operations.

■ Display

Messages:

Lets you turn screen messages on or off.

Display Background: Sets the screen background to Black,

Blue, or Logo when no image signal is available.

Startup Screen: Enables or disables display of the startup (User’s

Logo) screen when the projector is turned on.

A/V Mute: Sets the screen background to Black, Blue, or Logo

when the

A/V Mute button is pressed.

■ User’s Logo

Create a custom startup screen, as described on page 80.

■ Projection

Select Front (to project onto the front of a screen), Front/Ceiling

(when the projector is mounted upside-down from the ceiling),

Rear (to project from behind onto a transparent screen), or

Rear/Ceiling (to project from behind onto a transparent screen

when the projector is mounted upside-down from the ceiling).

■ Operation

note

If you hold down the

A/V Mute button on the

remote control for about five

seconds, you switch between

Front and Front/Ceiling

Rear and Rear/Ceiling.

Direct Power On is

enabled, the power cord is

connected, and a power

outage occurs, the projector

will start when the power is

restored.