Technical information

Launching PowerRIP
This section describes how to run PowerRIP, create PowerRIP printers, print to the
created PowerRIP printers, and reprint the last job. The PowerRIP Control Panel
Window, the Printer Setup Dialog, and the PowerRIP Completed Jobs Window are
described in detail.
Before launching PowerRIP, connect your EPSON Stylus to the PowerRIP server
(the Macintosh you have installed the PowerRIP application on). If you have a Mac
network, connect the Stylus to the
Printer port or Ethernet connection. If you have
a stand-alone
Mac, connect the Stylus to the Printer port and choose Remote Only
in the
Network Control Panel. Make sure that the printer is powered on.
If you haven’t registered your copy of PowerRIP you will not be able to launch the
application. See Registering PowerRIP on page
3.
To launch PowerRIP for the first time, open the PowerRIP 3.1 folder
on your hard drive and double click on the PowerRIP icon.
P
The application will launch and the PowerRIP-Control Panel window
will be displayed. This window is always open while PowerRIP is running.
Birmy Graphics Corporation 15