User`s guide

The table below lists some sample memory configurations.
Sample SIMM configurations
I
I
I I
32 MB 32MB 32MB 32MB
128MB
Once you have determined where to add SIMMs, follow the
instructions below to install them.
Installing Memory Modules
Refer to the illustration on page 6-2 to locate the SIMM sockets
on the main system board.
Follow these steps to install a SIMM:
1. Hold the SIMM so the notched edge faces the computer’s
back panel and place it in the socket at an upward angle of
about 45 degrees relative to the main system board.
Installing and Removing Options 6-11