User`s guide

Caution

If you are installing a second drive in the drive bay

assembly, be careful not to scrape or damage the

components on the installed drive.

If you need to install a second IDE hard disk drive, repeat

step 2.

Follow the instructions on page 7-13 to replace the IDE drive

bay assembly.

Removing an IDE Drive

Follow these steps to remove a hard disk drive from the IDE

drive bay assembly:

Remove the four screws that attach the drive to the

assembly. Be sure to support the drive as you loosen the

screws so it does not damage any other drive you have

installed.

7-12

Installing and Removing Disk

Drives