User`s guide

Installing a SCSI Drive

Your computer supports a variety of single-ended SCSI devices.

If you plan to install one to four SCSI drives, use only the SCSI

(lower) internal bays. If you plan to install more than four, you

can install the fifth and sixth drives in the upper internal bays

or in the external drive bays, if the drives use removable media.

Before you begin, locate two slide rails and two grounding clips

for each drive you will install. These items came in the box with

your computer. Also locate four screws for each drive; these are

supplied by your drive manufacturer.

If you plan to install four SCSI drives in the lower internal bays,

install them in the following order: bays 1,2,3, and 4, as shown

below. However, if you are installing fewer than four SCSI

drives, begin with bay 4 and work down. This optimizes

cooling and airflow inside your computer.

bay 2.

bay 1

7-18 Installing and Removing Disk Drives