User`s guide

How to Use This Manual
This manual explains how to set up, configure, and operate
your computer, as well as how to install optional equipment.
It does not cover your operating system; see your operating
system manual for instructions on installing and using it.
Although you should be sure to follow the steps in Chapters 1,
2, and 3 to set up and configure your system, you do not need
to read everything in this book. See the following chapter
summaries to find the sections you need.
Chapter 1 provides instructions for setting up your system.
Chapter 2 describes how to run the SETUP program to
configure your system when you do not have a diskette drive
or did not install any EISA option cards.
Chapter 3 describes how to run the EISA Configuration utility
to configure your computer when you have installed EISA
option cards.
Chapter 4 provides instructions for certain operating
procedures, such as locking the computer’s cover, using the
password features, and changing the operating speed.
Chapter 5 describes how to remove and replace the system
covers and the front panel to access the internal components.
Chapter 6 describes how to install and remove options.
Chapter 7 describes how to install and remove disk drives.
Appendix A contains troubleshooting tips.
Appendix B gives the technical specifications for the computer.
At the end of the manual, you’ll find a Glossary and an Index.
Introduction 3