User`s guide

Power-on diagnostic and boot error messages (continued)
Error
Countdown message
Number number Message
Solution
042
Invalid ISA configuration
An ISA board is
information
improperly configured;
run the ECU and verify all
jumper and switch
settings
043
Invalid EISA configuration An EISA board is
information improperly configured;
run the ECU and verify all
jumper and switch
settings
044 EISA configuration NOT
ASSURED!
If you installed EISA
option cards, this
message appears the
first time you boot your
system after running
SETUP; run the ECU to
properly configure your
system
020
Enable parity checking
and NMI
Not an error
000
Diskette read failure There is no diskette in
drive A insert a diskette
and try again; contact
your dealer if the
problem persists
001 Not a bootable diskette
Remove the diskette
from the drive and use a
bootable diskette, or
boot the system from the
hard disk drive; contact
your dealer if the
problem persists
002
No boot device available Make sure you are using
a bootable diskette or
that your hard disk drive
is formatted; contact
your dealer if the
problem persists
Troubleshooting
A-11