User`s guide

Memory Module Problems

If the memory count displayed by power-on diagnostics,

the SETUP program, or the EISA Configuration utility is

incorrect, you or your dealer may not have installed the

SIMMs correctly. The SIMMs may be installed in the wrong

sockets, they may be the wrong type of SIMM, or they may

not be inserted all the way into their sockets.

If your dealer installed the SIMMs for you, contact your

dealer; do not attempt to correct the problem yourself. If

you installed them, see “Memory Modules” in Chapter 6

and make sure you followed all the instructions correctly.

Check the speed and type of your SIMMs. Install only 80ns

(1MB, 2MB, 4MB, or 8MB) or 70ns (16MB or 32MB), 36-bit,

72-pin, tin-plated, fast-page mode SIMMs.

If you installed 16MB or 32MB SIMMs, be sure you

changed the settings of jumpers E0391 and/or E0392 on the

main system board to indicate the type of SIMMs you are

using. See Chapter 6 for instructions.

Be sure to run the SETUP program or the EISA

Configuration utility after you install or remove memory

modules to automatically update your configuration. See

Chapters 2 and 3 for instructions.

If you are still having trouble with your SIMMs, write

down any error messages you see and contact your dealer.

A-24

Troubleshooting