User`s guide

If the power cord supplied with your system is not compatible
with the AC wall outlet in your region, obtain a suitable power
cord that meets the following criteria:
The power cord must be rated for at least 125% of the
current rating of the AC voltage system. For more
information, refer to Appendix B.
The power cord connector that plugs into the wall outlet
must terminate in a grounding-type male plug designed for
use in your region.
The power cord connector that plugs into your system must
be an IEC type CEE-22 female connector.
The power cord must be less than 4.5 meters (14.76 feet)
long to comply with the system’s safety requirements.
Caution
Do not use or attempt to modify the supplied AC power
cord if it is not the type required for use in your region.
Installation Overview
The following steps offer an overview of the system installation
process. For detailed instructions on performing these steps,
refer to the specified sections.
1. Set the voltage selector switch on the back of the computer
to the correct input line voltage. (See page 1-4.)
1-2 Setting Up Your System