User`s guide
Configuring Your System
There are two programs you can use to configure your
computer: the SETUP program and the EISA Configuration
utility. Which one you use depends on the option cards you
may have installed in your computer.
You should use the SETUP program to configure your
computer in the following situations:
CL
You did not install any option cards or installed only ISA
option cards that did not come with configuration (CFG)
files
Cl
You do not have a diskette drive or have disabled your
diskette drive.
You should run the EISA Configuration utility to configure
your system if either of the following is true:
Cl
You have installed an EISA option card
Cl
You have installed an ISA option card that came with a
CFG file.
Your computer’s SETUP program is stored in the system BIOS
ROM. You can run SETUP whenever you turn on or reset the
computer, regardless of whether you have installed an
operating system. See Chapter 2 for instructions on running the
program.
The EISA Configuration utility is on the Reference diskette. See
Chapter 3 for instructions on running this utility.
1-10
Setting Up Your System