User`s guide

To continue without running SETUP, press the spacebar.
To run SETUP, press [.
If the power-on diagnostic tests find a serious error, you hear
a beep code indicating the error and the system halts. See
Appendix A for a list of the error beep codes and suggested
solutions to the problem.
Now you see the first page of SETUP information:
Page 1 of 4
Syatclm Time: 10:40:59
symtem Date: Dot 12, 1993
Languacm: Englimh
Onhoard Plop~y: Bhabled
Dhkette A: 3.5". 1.44 MB
Dimkott. Br Not Izmtalled
onhoard 1DE:EJlabl.d
Hard Driva 1: m 3
Eard Drim 2: Not Insitallsd
-Disk Subsystem
Cylindora: 723
eordn: 13
Prec~anaation: 0
Land zone:
722
Stactora: 51
siza t 234
User Definable Drives:
2and3
There are four pages of SETUP information. Follow the
instructions in the next section to view or change your
settings and display the other pages.
Selecting Options
To move the cursor from the current option to the next or
previous available option, press m or [. (If there is
more than one option on a line, you can also press [tl or
[-) to move to the next or previous option.)
Running the SETUP Program 2-3