User`s guide

SETUP program options (continued)
Onboard
FlOPPY
Diskette A
Diskette B
Onboard IDE
Hard Drive 1
Hard Drive 2
User Definable
Drives
Settings
Enabled *
Disabled
5.25”. 360 KB
5.25”
1.2 MB
3.5”, 720 KB
3.5”: 1.44 MB (A*)
3.5”, 2.88 MB
Not Installed (B*)
Enabled
Disabled *
Type nn
Not Installed l
2 and 3 *
48 and 49
Description
Set to Enabled to use the built-in
diskette drive controller; set to
Disabled to disable the built-in
controller if you are either not
using a diskette drive or will use a
controller on an option card
Set to the type(s) of diskette
drive(s) installed in the system; set
to Not Installed if you do not
have the specified drive installed
Set to Enabled to use the built-in
IDE hard disk drive controller to
control your IDE drive(s); set to
Disabled to use an external IDE
drive controller (1)
Set to the hard disk drive type of
the specified IDE hard disk drive
or enter parameters for
user-definable drive type
according to the drive’s
documentation; select the
user-defined drive type number
you want to use in the option
described below; select Not
Installed for both options if you
have installed a SCSI hard disk
drive. (For more information, see
“Hard Disk Drive Types” on
page 2-12.)
Select the pair of user-definable
drive types you want to use to
enter your drive’s parameters;
select the type and enter the
parameters using the option
described above
Running the SETUP Program
2-5