User`s guide

SETUP program options (continued)
Option
Keyboard
Settings
installed
Not Installed *
Description
Set to Installed to allow your
computer to operate with a
keyboard; set to Not installed to
use your computer without a
keyboard (for example, as a
network server) and allow
power-on diagnostic tests to
report a disabled keyboard
instead of a failed keyboard
NumLock on
Yes
at boot No*
Set to Yes to turn on Num Lock
mode whenever you turn on or
reset your computer; set to No to
turn it off
Password
Not installed *
Installed
To set a power-on password,
highlight this option when the
setting is Not installed and press
m or a. Then follow the
instructions on the screen to
enter the password; the setting
changes to Installed. (See
Chapter 4 for more information
about the password function.)
POST Memory
Test Prompt
Enabled *
Disabled
Set to Enabled to display the skip
memory test prompt when you
turn on or reset your computer;
select Disabled to prevent
display of the prompt. (You can
still press the spacebar to skip the
test if you disabled the prompt.)
See page 2-2 for more
information.
POST Setup
Prompt
Enabled *
Disabled
Set to Enabled to display the
prompt to run the SETUP program
when you turn on or reset your
computer; select Disabled to
prevent display of the prompt.
(You can still press [to run
SETUP if you disable the prompt.)
See page 2-2 for more
information.
Running the SETUP Program
2-7