User`s guide

Using the Keyboard
If you use a keyboard when you run the EISA Configuration
utility, refer to the table below for a description of the keys you
can use to move the cursor and select items. If you’ll be using a
mouse with the program, see “Using a Mouse” below. Most of
the screens show which keys you can press to perform various
operations. Follow the instructions on each screen.
Whenever the <OK> icon is highlighted, press w to select
<OK>. To select <Cancel>, you can either press the [ key
or highlight <Cancel> and press mEntar
Key commands
Key
Function
moor a
Moves the cursor to the next field
m moor=
Moves the cursor to the previous field
[or a
Highlights items within a list or scrolls the
screen
m Selects the highlighted option
I
Cancels the current action or menu
@j-J or IPg
Moves the cursor up or down one screen
[B
Moves the cursor to the first line of
information
(xi-1 [End)
Moves the cursor to the last line of
information
Using a Mouse
The first time you run the EISA Configuration utility, you must
use the keyboard. After configuring your system, load your
operating system and then install your mouse driver. Then you
can run the utility using your mouse.
Running the EISA Configuration Utility
3-5