User`s guide

Configuring Your System
Follow the instructions in this section and on your screen to
configure your computer using the EISA Configuration utility.
You configure your system in the following order:
0 Set the date and time
Ct Add or remove boards; when you add an option card,
select this option to copy the necessary configuration files
Ct View or edit the details of your configuration; use this
option to define your configuration
LI View or print your jumper and switch settings
Cl Save the configuration as you exit the program.
Starting the Program
Follow these steps to start the EISA Configuration utility:
1. Insert the Reference diskette in drive A and turn on or reset
the computer.
2. After a moment, you see the title screen for the EISA
Configuration utility. Press B to continue. You see the
Welcome screen.
Note
If you installed any EISA option cards in your system,
you see a message telling you to configure your
computer. Press IEnter] to continue.
Running the EISA Configuration Utility 3-7