User`s guide

System board options (continued)
Option
Settings
Concurrent
Enabled*
Refresh Disabled
Description
Set to Enabled to improve
performance by executing
concurrent CPU, cache, and
main memory refresh cycles;
set to Disabled if you have
trouble with application
programs while this option is
enabled
LCD
-
This option has no effect on
your system
Scan FLASH
User Area
Enabled
Disabled*
Set to Enabled to allow the
BIOS to call any code you
have installed in the 8KB block
EA000h to EBFFFh (FLASH user
area) prior to booting the
computer; set to Disabled to
scan the block normally
POST Memory
Test Prompt
Enabled *
Disabled
Set to Enabled to display the
skip memory test prompt
when you turn on or reset your
computer; select Disabled to
prevent display of the prompt.
(you can still press the
spacebar to skip the test if you
disabled the prompt.) See
Chapter 2 for more
information.
BIOS Setup
Control
Enabled - Prompt for Select Enabled - Prompt for
setup entry *
setup entry to display the
Enabled - Suppress prompt to run the SETUP
setup prompt program when you turn on or
Setup Disabled
reset the computer; select
Enabled - Suppress setup
prompt to prevent display of
the prompt; select Setup
Disabled to prevent entry into
the SETUP program until this
option is changed
3-18 Running the EISA Configuration Utility