User`s guide

The options described in the table below appear on the View
or edit details screen only if you are running the EISA
Configuration utility in Advanced mode. See “Using Special
Modes” on page 3-27 for more information.
Advanced mode system board options
Option
Settings Description
Video Font Size
9x16*
8x16
Extended (settings vary)
Memory Range
Definitions
Additional
expansion
board address
Enabled
Disabled l
Slot 4 AEN
Control
EISA Compatible l
ISA Compatible
* Default setting
Select the font dimensions of the
video characters that appear on
the screen
Displays the defined ranges of
memory resident on the system
board
If you have installed more than
15MB of memory in your system,
you may want to set this option to
Enabled to map additional
address space to the EISA bus for
use by option cards. Enabling this
space opens a 1 MB to 128KB
area between addresses
0F00000h and 0FE0000h and
reduces the available extended
memory by 1 MB. Select Disabled
to use this address area for
extended memory.
When slot 4 is set to EISA
Compatible, it uses the EISA
geographical addressing
scheme. If you set slot 4 to ISA
Compatible, it allows all types of
I/O accesses that may be
required by option cards
addressed in the range 0-255.
3-20 Running the EISA Configuration Utility