User`s guide
2.
Then type the following and press
(
to start the
program:
CF [parameters]
The table below describes the parameters you can use to
modify the way the utility runs on your computer.
CF command parameters
Parameter
IA
/B
/D
/F
/H
/K
Mode
Advanced
mode
BIOS video
output mode
Dispatcher
spawning mode
Fast
configuration
operation
High resolution
display mode
Keyboard only
mode
Function
Enables four advanced options for
the system on the View or edit
details screen; see page 3-23 for
more information.
Causes the program to be
displayed using BIOS int 10h calls for
systems using non-standard displays
or that are redirecting the console
output to a serial port. In default
mode, the program writes directly
to the video memory.
Causes the program to be
spawned by the dispatcher.
Causes the program to determine
the boards and options installed
and configure your system
automatically using the information
in the CMOS RAM; if it is invalid, the
program uses the information in the
SYSTEM.SCI file.
Displays 43 lines per screen on an
EGA monitor and 50 lines per
screen on a VGA monitor. In
default mode, the screen displays
25 lines.
Sets the program so a mouse
cannot be used, even if you have
installed one. In default mode, you
can use a mouse as long as a
mouse driver is loaded.
3-30
Running
the EISA Configuration Utility