User`s guide

Function
CF command parameters (continued)
Parameter
/M
Mode
Monochrome
display mode
Causes the program to be
displayed in black and white only.
In default mode, color monitors will
display in color. Run the program in
this mode if you have redirected
the console output to a serial port.
/N
Non-target
modeling mode
Allows you to run the EISA
Configuration utility in non-target
modeling mode; see page 3-25 for
more information.
Causes the program to exit without
rebooting the computer.
Copying the Configuration Files to a Hard Disk
To run the EISA Configuration utility from your hard disk, you
must be running MS-DOS from that disk.
To copy all the configuration files from the Reference diskette
to the hard disk, insert the diskette in drive A, type the
following command, and press [Enter:
COPY A:*.* [d:] [path]
where d: and path are the drive and directory to which you
want to copy the files.
Running the EISA Configuration Utility 3-31