User`s guide
Setting Passwords
There are two ways to set a power-on password:
tl
Using the SETUP program
Cl
Using the EISA System Utilities.
To set a power-on password in SETUP, follow the instructions
in Chapter 2 for starting and running the program. Select the
Password option on the second page of SETUP options and
follow the instructions on the screen to set a password.
You must run the EISA System Utilities to set a network and
keyboard password, but you can also use it to set a power-on
password.
Follow these steps to set your password(s):
1.
To start the EISA Configuration utility, insert the Reference
diskette in drive A.
2.
Log onto drive A and type
SD.
Press [Enter at the next two
screens to bring up the Main Menu.
3. Select Access System Utilities.
4.
Then select
Password Utility.
You see the following:
Password Utility Menu
Set Initial Power-on Password
Activate/Deactivate Network Password
Set Keyboard Password
Lock Keyboard
Return to Utilities Menu
Now follow the steps in the appropriate section(s) below.
4-6
Using Your Computer