User`s guide

Changing or deleting a keyboard password
If your keyboard password is the same as your power-on
password, follow the steps in the section above to change or
delete it. Then reboot your system.
If your keyboard password is different from your power-on
password, you can make both passwords the same by turning
off or resetting your computer. The keyboard password
becomes the same as your power-on password.
To temporarily change your keyboard password to something
other than your power-on password, follow these steps:
1.
2.
3.
4.
5.
6.
7.
8.
To start the EISA Configuration utility, insert the Reference
diskette in drive A.
Log onto drive A and type SD. Press [Enter] at the next two
screens to bring up the Main Menu.
Select Access System Utilities.
Select Password Utility.
Thenselect Set Keyboard Password. You see a message
telling you that a keyboard password already exists. Press
IEnter
The computer locks the keyboard and you see a prompt to
enter your password. Type your power-on password and
d
press Enter .
You see a prompt to enter your new keyboard password.
Type a new password and press [Entsr].
At the next prompt, enter the password again. You see the
Password Utility Menu. Follow the instructions on the
screen to exit the EISA Configuration utility.
Using Your Computer
4-11