User`s guide

Using the EISA System Utilities
You can temporarily change the processor speed using the
EISA System Utilities. This method is convenient if your
application program does not recognize the [F] [An] key
commands to change the processor speed. Follow these steps:
1. Insert the Reference diskette in drive A.
2. Log onto drive A and type SD. Press w at the next two
screens to bring up the Main Menu.
3. Select Access System utilities from the Main Menu.
You see the following:
System Utilities Menu
Password Utility
System Speed FAST
System Speed SLOW
Speaker ON
Speaker OFF
Cache ON
Cache OFF
EXIT Utilities
4. Select System Speed FAST or System Speed SLOW.
You see a message confirming the speed change.
5. Press m to return to the System Utilities Menu. Then
follow the instructions on the screen to exit the EISA
Configuration utility.
The processor speed you set remains in effect until you press
the reset button, turn off the computer, or change it to a
different setting.
Using Your Computer
4-15