User`s guide

If you want to change the default setting temporarily, use the
EISA System Utilities, as described below. Then, whenever you
turn off or reset the computer, the setting returns to the default
setting you selected in the SETUP program or the EISA
Configuration utility.
1.
2.
3.
4.
5.
To start the EISA Configuration utility, insert the Reference
diskette in drive A.
Log onto drive A and type SD. Press m at the next two
screens to bring up the Main Menu.
Select Access System Utilities from the Main Menu.
You see the following:
System Utilities Menu
Password Utility
System Speed FAST
System Speed SLOW
Speaker ON
Speaker OFF
Cache ON
Cache OFF
EXIT Utilities
Select Cache ON or Cache OFF. You see a message
confirming the new setting.
Press w to return to the System Utilities Menu. Then
follow the instructions on the screen to exit the EISA
Configuration utility.
The setting you define will remain in effect until you turn off or
reset the computer, or until you change it to a different setting.
4-18 Using Your Computer