User`s guide

Installing a PC Card

To install a PC card in one of the slots, follow the instructions in

Chapter 4 of your ActionNote 800 Series User's Guide. Your

system configures most PC cards automatically.

The upper slot on the replicator is slot 2 and the lower slot is

slot 3. Use the CardView™ software installed on your

ActionNote to monitor PC card usage and reconfigure your

cards or system resources if necessary.

Specifications

Interfaces

Parallel

Serial

Centronics

compatible; 25-pin, D-sub,

fern ale connector; standard S-bit parallel;

supports standard (AT compatible) and

bi-directional (PS/2 compatible) modes

Two RS-232C, programmable,

asynchronous, 9-pin, D-sub male

connectors

Video

Auto-sensing, 15-pin, D-sub, female

connector for analog monitor

PCMCIA slots

Accept two Type 1 or II cards, or one Type

I or II and one Type III; PCMCIA version

2.01 and JEIDA 4.1 compatible

Mouse Auto-sensing, 6-pin, mini-DIN connector

for a PSI 2-type pointing device

ActionPort Replicator