User manual

Paper Handling
The following section guides you through problems in handling
single sheets and continuous paper. If you are having problems
using the optional cut-sheet feeder, see the section on options
starting on 6-10.
Single sheets do not feed properly.
l Printing starts too low on the page, or the bottom part of one
page is printed at the top of the next page.
Be sure to choose the correct printer when you choose a
printer from your application program’s menu. See
Chapter 1.
If possible, specify single sheet paper with your application
software.
Use your application software to reduce or eliminate the top
margin and to reduce the page length.
l When you press the AUTO LOAD button, the platen does not
rotate and paper does not feed.
If the ON LINE light is on, press the ON LINE button once to
set the printer off line.
l When you press the AUTO LOAD button, the platen rotates but
paper does not feed.
Check that the paper-release lever is pushed back to the
single-sheet position.
6-8 Troubleshooting