User manual

ManualsBrandsEpson ManualsOtherPrinter Accessories S020122

EPSON

MSDS # S020122 Version 3.51 (USA)

Page 1 of 4 Release Date 02/07

Material Safety Data Sheet

1. Article and Corporate Identification

Product: Epson Ink Cartridge S020122

for use with Epson Stylus Color 3000

and Pro 5000 Printer

Manufacturer/Distributor: Epson America, Inc.

3840 Kilroy Airport Way

Long Beach, CA 90806

United States

TEL: 562-276-1369

FAX: 562-997-5799

The EPSON S020122 Ink Cartridge

2. Composition Information

This is an aqueous ink formulation

Ink Composition CAS No. % By Weight

Proprietary dyes and pigments - < 3 %

Diethylene glycol 111-46-6 <12%

Proprietary organic materials - 10 –15 %

Glycerols - 5 –10%

Water 7732-18-5 balance

3. Hazard Identification

3.1 Emergency Overview: Ink component is a light yellow liquid that may cause eye irritation. Avoid contact with

eyes or clothing. In the case of skin contact, wash with soap and water. Keep out of reach

of children.

3.2 Potential Health Effects:

Eyes: Ink contact with eye may be mildly irritating. See Section 11 for Toxicology.

Skin: Ink contact with skin may cause irritation, swelling, or redness. It is not expected to cause an allergic

skin reaction. See Section 11 for Toxicology.

Inhalation: Intentional exposure to ink vapors may cause respiratory irritation. See Section 11 for Toxicology.

Summary of content (4 pages)

PAGE 1
EPSON Material Safety Data Sheet 1. Article and Corporate Identification Product: Epson Ink Cartridge S020122 for use with Epson Stylus Color 3000 and Pro 5000 Printer Manufacturer/Distributor: Epson America, Inc. 3840 Kilroy Airport Way Long Beach, CA 90806 United States TEL: 562-276-1369 FAX: 562-997-5799 The EPSON S020122 Ink Cartridge 2. Composition Information This is an aqueous ink formulation Ink Composition CAS No.
PAGE 2
EPSON Ingestion: 4. May cause upset stomach. See Section 11 for Toxicology. First Aid Measures 4.1 Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical attention if eye irritation continues. 4.2 Skin: Wash surface areas with soap and water. Wash soiled clothing before rewearing. Consult a physician if irritation continues. 4.3 Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary. 4.
PAGE 3
EPSON Appearance: Odor: pH: Boiling point: Freezing point: Melting point: Flash point: Autoflammability: Explosive properties: Oxidizing properties: Vapor density: Relative density: Solubility in water: Solubility in fat: Partition coefficient: Viscosity: Yellow Liquid None 9 - 10 Approximately 212 deg. F / 100 deg. C Less than 32 deg. F / 0 deg. C Less than 32 deg. F / 0 deg. C Greater than 230 deg. F / 110 deg. C (closed cup, ASTM D3278) None None None Greater than 1 (air = 1) 1.07 at 68 deg. F / 20 deg.
PAGE 4
EPSON 14. Transportation Information Not regulated as a Hazardous Material by DOT, IMO, or IATA. This material does not require a TSCA Section 12(b) Export Notification. 15. Regulatory Considerations U.S. DOT Hazard Class Regulated? U.S. OSHA Inhalation Hazard? In U.S., NFPA/HMIS Hazard Rating: NO NO Health (1), Flammability (1), Instability/Reactivity (0), Other (0) 16. Other Information This MSDS adheres to U.S.