Owner`s manual

PriorityFax 2000 Manual
Registering Your Number
and Name
After you use the following procedure to register your number
and name, they are automatically printed (along with the page
number) at the top of each page of each document you send. This
makes it easy for the recipients of your faxes to identify and keep
straight all the pages you send.
To register your fax number and name, perform the following
steps:
Make sure no document is in the machine.
Press FUNCTION. You see the function display.
Press 1 to choose the register mode.
Press 1 again. You see the following display:
Enter your fax number using the keypad. You can enter up to 22
digits, but the display can show only the last 13 to 16 digits. Be
sure to include your area code so that it can appear on the top of
each page you send.
Note
If you make a mistake when you are entering this number,
use the * cursor key to move the cursor to the incorrect
digit. Then retype the rest of the number. If you need to
erase an entire number, see Removing Numbers and
Names later in this chapter.
2-14