Owner`s manual

Using the PriorityFax as a Tel&phone
Move the switch left to H for higher volume and right to N for
lower (normal) volume.
To adjust the ringer switch:
Locate the RINGER switch on the left side of the telephone cradle
to the right of the HANDSET switch.
Move the switch left to H for high, center to L for low, or right to
OFF for no ringing.
Standard Dialing
There are two ways to start dialing a telephone call: lifting the
handset or pressing the SPKR button.
To use the handset, simply lift the handset off the cradle, wait for a
dial tone, and dial the number.
To use the SPKR button, follow these steps:
Press SPKR.
Leaving the handset in its cradle, wait for the dial tone, and then
dial the number.
(Include the area code if the number is outside of
your dialing area.)
Note
Remember that you can adjust the speaker volume by
moving the SPEAKER dial on the back control panel of
the fax machine.
When you hear the number start ringing, lift the handset. The
PriorityFax is not a speaker phone. You cannot speak to someone
on the other end without using the handset.
3-5