Owner`s manual

PriorityFax 2000 Manual
Activity Report
Timing
Ordinarily, the PriorityFax automatically prints an activity report
every 12 hours. (See page 2-25.) If you send and receive a great
number of faxes, you may want to change this interval. To change
the time between automatic activity reports, follow these steps:
Using Delayed Send
Make sure no document is in the machine.
Press FUNCTION. You see the function display.
Press 8. You see the following display:
Use the keypad to enter the new time. Remember that the time in
this function is the time between report printings, not the time of
day the reports are printed. If you choose an interval time of less
than ten, enter two digits (for example, 03 for a three-hour
interval). The minimum interval is 01 (for a one-hour interval) and
the maximum is 24 (for a 24-hour interval).
Press SET twice to return to the date/time display.
The Delayed Send feature allows you to send documents at times
when you know you will be out of the office and when telephone
rates are lower. To use Delayed Send, follow these steps:
Insert a document face down into the feeder. The ready display
appears.
4-14