Product Support Bulletin

PSB No: P-0071
Page: 6 of 7
To enter Inttlal Halntenance Mode, Hold down the
FINE/PHOTO and START/COPY buttons while aoDlYlng Dower.
Initial Maintenance Mode
I
,
Press FINE/PHOTO 1 time
Sets second digit to 1
Press START/COPY 10 times
Sets first digit to 0
Press FINE/PHOTO 1 time
Completes code entry
Second level switches accessible
(OPTIONAL)
Press the FINE/PHOTO Button: l=Table 2
To orrnt a SYSTEM
1, 2, or 3 times to select : P=Table 3
CONFIGURATION LIST:
the desired switch bank.
Press FINE/PHOTO 1 tlme
(See Tables 2. 3, and 4)
i 3=Tab'e 4
Press START/COPY 1 time
Press FINE/PHOTO 1 tlcne
Press the START/COPY button Enters selection
(Prints current switch status)
I 'Ii listortable 2. 3, or 4.
Refer to the System configuration
1 1 Press the START/COPY button 1 Enters selection
t I
I
Press the FINE/PHOTO button
once to select 1.
Sk10 this
Refer to table 2, 3, or 4 for
step to select 0. more detail.
1
Press the START/COPY button Enters selection
I 1
Press START/COPY to set
I I
Press STOP to exit
I
Pressing STOP will print
other switches.
current switch bank.
switch status
I
Press STOP to exit Initial Maintenance Mode
Returns the unit to normal
ooeration.
Figure 2