Specifications

Using the PriorityFax
AUTO ANS
ON OFF
One-touch and Speed
Dial Faxing
One-touch Faxing
Registering one-touch fax
To register the one-touch fax numbers, first set the TONE/PULSE
numbers
switch as described on page 3-2 Then follow the steps below:
Do not touch the received document until it is completely out of
the front paper slot. Pulling on a document that is still coming out
of the fax machine can decrease the image quality.
Don’t worry about missing a fax if you leave the AUTO ANS
switch off and are away and unable to answer your telephone.
After ten rings with no answer, the fax machine begins automatic
reception anyway.
You can dial the fax numbers you use most often by pressing only
one key (for up to three numbers) or only three keys (for up to 17
more numbers). Once you register them with the procedures
described below, the numbers are in the memory of the PriorityFax
for easy access.
You can register up to three fax numbers for dialing frequently
called numbers by pressing just one button. If you prefer using the
one-touch feature for telephone numbers, see Chapter 3.
Lift the telephone handset and look at the handset buttons. The
large button at the bottom is the DIAL TONE RESET button,
which is shown below.
Dial Tone Reset