Datasheet

ManualsBrandsEpson ManualsCrystals & OscillatorsQuartz Crystal FA-238V Surface Mount 12MHz 12pF 50ppm

STMicroelectronics

SPECIFICATIONS

Product No. :

Q22FA23V0000100

MODEL :

FA-238V

SPEC. No. :

A18-438-4B

DATE :

Oct. 5. 2018

SEIKO EPSON CORPORATION

8548 Naka-minowa

Minowa-machi Kamiina-gun

Nagano-ken

399-4696 Japan

CHECKED

Kunihito Yamanaka

/ TD Engineering Department Manager

CHECKED

Masashi Shirotori

/ TD Production Engineering Department Senior Staff

CHECKED

Yoshitaka Kurahashi

/ TD・CS Quality Assurance Department Manager

PREPARED

Emi Oguchi

/ TD・CS Quality Assurance Department Senior Staff

RECIPIENT

Summary of content (17 pages)

PAGE 1
STMicroelectronics RECIPIENT SPECIFICATIONS Product No. : Q22FA23V0000100 FA-238V MODEL : SPEC. No. : A18-438-4B DATE : Oct. 5.
PAGE 2
SPECIFICATIONS 1. Application 1) This document is applicable to the crystal unit that are delivered to STMicroelectronics from Seiko Epson Corp. 2) This product complies with RoHS Directive. 3) This Product supplied (and any technical information furnished, if any) by Seiko Epson Corporation shall not be used for the development and manufacture of weapon of mass destruction or for other military purposes.
PAGE 3
[ 1 ] Absolute maximum ratings No. 1 Item Storage temperature range Symbol T_stg Rating value Min. Typ. Max. - 40 - +125 Unit Note Depends on the Environmental characteristics specifications. C [ 2 ] Operating range No. Item Symbol 1 Operating temperature range 2 Level of drive Rating value Unit Min. Typ. Max. T_use - 20 - +85 C DL 1 100 200 W Note [ 3 ] Static characteristics No.
PAGE 4
[ 4 ] Environmental and mechanical characteristics (The company evaluation condition：We evaluate it by the following examination item and examination condition.) Value * 1 * 2 No. Item Test Conditions f / f [1 10-6] 100 g dummy Jig (Seiko Epson Standard) *3 10 1 Shock drop from 1 500 mm height on the Concrete 3 directions 10 times 10 Hz to 55 Hz amplitude 0.75 mm 55 Hz to 500 Hz acceleration 98 m/s2 *3 5 2 Vibration 10 Hz 500 Hz 10 Hz 15 min.
PAGE 5
[ 5 ] Dimensions and Circuit 1) Dimension (Unit : mm) 3.2 ± 0.1 #3 2.5 ± 0.1 #4 0.2 #1 0.7 Max. #2 Internal connection TOP VIEW #2 #4 #3 #1 #2 0.7 0 0.8 #1 #4 1.2 0.9 Terminal #2, #4 are connected to the LID (Please connect GND) Terminal Plating : Au plating #3 4 Ver.
PAGE 6
[ 6 ] Recommended soldering pattern and Marking layout 1) Recommended soldering pattern (Unit : mm) 1.4 1.2 1.6 2.2 2) Marking layout Nominal frequency Unit : MHz 1200P V8YAA Factory identity No. Symbol mark Production month Production year Production month January February 1 2 ...... ...... October X November Y December Z Nominal frequency is only one example. Nominal frequency omits the figure below the second place of decimals. ex) 12 MHz ......
PAGE 7
[ 7 ] Notes 1. Max. three(3) times re-flow is allowed. Its recommended to manually solder when not enough/no solder detected.( Using soldering iron at +350 C Max within 5 seconds) 2. Patterning on a board should follow our company recommended pattern. 3. Too much exciting shock or vibration may cause deterioration on damage. The product may damage depends on the condition such as a shock in assembly machinery. Please check your process condition in advance to minimize and maintain the shock level. 4.
PAGE 8
PAKING SPECIFICATION SEIKO EPSON CORP. TAPING SPECIFICATION テープ梱包基準書 1. APPLICATION 適用範囲 This document is applicable to FA-238 / FA-238V 本基準書は､FA-238 / FA-238V のテーピング梱包について規定する。 2. CONTENTS 目次 Item No.
PAGE 9
PAKING SPECIFICATION [ 1 ] Taping specification SEIKO EPSON CORP. テーピング仕様 Subject to EIA-481 , IEC 60286 , JIS C0806.. 「EIA-481」「IEC 60286」「JIS C0806」に準拠する。 (1) Tape dimensions TE0804L Material of the Carrier Tape キャリアテープ材質: PS Material of the Top Tape トップテープ材質 : PET+PE +0.2 1.0 -0 φ 4 .0 ±0.1 1.05±0.05 3.5±0.1 0.25± 0.05 8.0±0.2 2.0±0.05 4.0±0.1 3.5±0.05 +0.1 φ1.5 -0 1.75±0.1 10 P: 40±0.1 2.8±0.1 Unit : mm * Inner carve of each corner 0.25 mm Max. *各コーナーの内 R は 0.25 Max.
PAGE 10
PAKING SPECIFICATION (3) Packing 収納形態 (a) Tape & Reel Label SEIKO EPSON CORP. デバイス収納方法 Tape reel ラベルテープリール Top tape トップテープ Carrier tape キャリアテープ 4000 E95A 4000 E95A 4000 E95A 4000 E95A User Direction of feed 引き出し方向 (b) Start & End Point 引き出し先頭側及びリール側の処理 Start End Enpty pocket Tape Trailer Side 空ポケット Pull out direction 引き出し方向リーダー部(引き出し先頭) トレーラー部(空きポケットリール側) Item Empty Space 項目空きスペース Top Tape トップテープ Tape leader Empty pocket Reel side Tape Leader Top tape Min.
PAGE 11
PAKING SPECIFICATION SEIKO EPSON CORP. [ 2 ] Shipping carton 外装箱への収納 a) Packing to antistatic bag 袋への収納 Sealing 熱シール Antistatic bag Label 静電防止袋ラベル b) Packing to shipping carton 外装箱への収納 If there is space in the outer box, material is put in a shock absorbing together.
PAGE 12
PAKING SPECIFICATION SEIKO EPSON CORP. [ 4 ] Quantity 収納数量 3 000 pcs./reel (Standard) However it is not the limit, in case that the order quantity does not fill with 3 000 pieces. Packing quantity is defined by 14th and 15th digit of product number. 但し、注文数量が 3 000 pcs に満たない場合は、その限りではない。収納数量は、製品型番の 14 桁、15 桁による。 14th and 15th digit of product number.
PAGE 13
- PROCESS QUALITY CONTROL SMD TYPE AT STRIP CRYSTAL FA-238V No.A-0303-02-AAE-7 FA238V_Q_0001 2014.05.08 Manufacturing process chart CRYSTAL BLOCK ▽ 1 In-coming Inspection Ｎo.
PAGE 14
Structure Diagram 構造図 Model FA-238V 型式 Document No. FA-238V_D_0001 管理№ ① ② ④ ③ ⑤ No. Name of Part 部品名 ① Lid ② Package ③ Crystal Adhesive ④ Crystal chip ⑤ Terminal 端子ﾘｯﾄﾞパッケージ水晶接着水晶片 Rev.
PAGE 15
PAGE 16
PAGE 17