Service manual

EPSON Stylus Photo R280/R285/R290 Revision B

Chapter 3 Troubleshooting 3.3 Troubleshooting by Error Message 39

Any time

The PF Motor drive force is not

transmitted to the LD Roller.

ASF Unit

3. Is the clutch damaged? 3. Replace the ASF Unit.

4.4.14 “ASF

Unit”(p.88)

4. Is the Compression Spring 2.36 of the Change

Lever detached?

4. Replace the ASF Unit.

The LD Roller shaft is not set in the

ASF home position, and paper is

always fed from the ASF Assy.

ASF Unit

1. Is the edge of the Change Lever chipped or

broken?

1. Replace the ASF Unit.

Table 3-9. Troubleshooting for No Paper Error

Occurrence

Timing

Symptom Failed Part Check Point Remedy Reference

LD Roller

Clutch

ASF

Compression Spring2.36

Change Lever

CR Motor

Edge of Change Lever