Color Inkjet Printer Service Manual
Table Of Contents
- EPSON Stylus Photo R300/R310
- TROUBLESHOOTING
- DISASSEMBLY AND ASSEMBLY
- 2.1 Overview
- 2.2 Caution regarding assembling/disassembling the printer mechanism, a·Yl|Z6±¬¨–‹šÒq¿GZ~YçlçXX
- 2.3 Disassembly
- 2.3.1 Removing Paper Support Assy.
- 2.3.2 Removing Housing, Upper
- 2.3.3 Removing Housing, Middle
- 2.3.4 Removing Porous Pad, Paper Guide, Front
- 2.3.5 Removing Panel Board
- 2.3.6 Removing Stacker Assy.
- 2.3.7 Removing Main Board
- 2.3.8 Removing ASF Assy.
- 2.3.9 Removing Holder, Shaft Assy.
- 2.3.10 Removing CR Motor
- 2.3.11 Removing APG Assy.
- 2.3.12 Removing Print Head
- 2.3.13 Removing Carriage Unit
- 2.3.14 Removing Paper Guide, Upper
- 2.3.15 Removing Printer Mechanism/ Housing, Lower
- 2.3.16 Removing Power Supply Unit
- 2.3.17 Removing CDR Guide Assy.
- 2.3.18 Removing Ink System
- 2.3.19 Removing Paper Guide, Front/Roller EJ Assy.
- 2.3.20 Removing PF Motor
- ADJUSTMENT
- 3.1 Adjustment Items and Overview
- 3.2 Adjustment by using adjustment program
- 3.2.1 Market Setting
- 3.2.2 USB ID Input
- 3.2.3 Head ID Input
- 3.2.4 Head Angular Adjustment
- 3.2.5 Bi-d Adjustment
- 3.2.6 PW Sensor Adjustment
- 3.2.7 First Dot Adjustment
- 3.2.8 Offset Input for CR Motor Calorific Limitation
- 3.2.9 A4 Normal Paper Print
- 3.2.10 A4 Photo Quality Inkjet Paper Print
- 3.2.11 A4 Photo Paper/ Glossy Photo Paper print
- 3.3 Adjustment Except Adjustment Program
- MAINTENANCE
- APPENDIX

EPSON Stylus Photo R300/R310 Revision A
TROUBLESHOOTING Troubleshooting with LED/LCD Indications and Status Monitor 3 Message 13
CD/DVD Tray Error On
[Stylus Photo R300]
CD/DVD tray load error.
Reload tray and press Maintenance.
[Stylus Photo R310]
The CD/DVD tray is not set correctly.
Reload the tray, then press the
Maintenance button.
This error is detected when "CD/DVD Tray"
cannot be detected while CD/DVD printing.
Memory Card Error
(Non supported
Memory Card)
On
The inserted card cannot be used with
this printer.
No Display
This error is detected when non standardized
Memory Card is inserted.
Bluetooth Module Error On
Bluetooth Photo Print Adapter error.
Disconnect the Adapter from the
printer, then reconnect it.
No Display
This error is detected when there is no response
from Bluetooth Module.
Irregular external device Blink
The connected device cannot be used.
(The warning is displayed for one
second every 3 seconds.)
No Display
This error is detected when some non supported
device is connected to the port for the external
memory device.
Fatal error On
[Stylus Photo R300]
System error. Press and hold both
Power and Stop buttons for 7 seconds.
[Stylus Photo R310]
System error. Simultaneously press
and hold the Power and Stop buttons
for 7 seconds to turn off the printer.
This error is detected when ;
1. "Carriage Unit" cannot move correctly by the
external force in each operation.
2. "PF Motor" cannot rotate correctly while "PF
Motor" operates.
Table 1-3. LED/LCD Indication and STM3
Printer status
Maintenance
LED indication
LCD indication STM3 message Condition for error detection