Color Inkjet Printer Service Manual

Stylus Photo R300/R310 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 37
2.3 Disassembly
The following flowchart shows the order of disassembling procedure. When disassembling any unit, refer to the page number shown in the flowchart.
Figure 2-1. Removing Procedure Flowchart
NOTE: indicates that the procedure in the broken-line box is NOT the shortest
removing procedure, but the passing point for the next removing procedure.
NOTE: When removing ’CDR Guide Assy.’ or ’Paper Guide, Front/ Roller EJ Assy.’, We
have to remove Carriage Unit before removing Printer Mechanism.
START
Removing Housing, Middle
(2.3.3 P.41)
Removing Paper
Support Assy.
(2.3.1 P.38)
Removing Main Board
(2.3.7 P.46)
Removing ASF Assy.
(2.3.8 P.49)
Removing Holder,
Shaft Assy.
(2.3.9 P.51)
Removing Printer
Mechanism/Housing,
Lower (2.3.15 P.64)
Removing Carriage
Unit
(2.3.13 P.57)
Removing CDR Guide
Assy.
(2.3.17 P.69)
Removing Paper Guide,
Front/Roller EJ Assy.
(2.3.19 P.74)
Removing Paper
Guide, Upper
(2.3.14 P.63)
Removing Carriage Unit
(2.3.13 P.57)
Removing APG Assy.
(2.3.11 P.55)
Removing Main Board
(2.3.7 P.46)
Removing Power Supply
Unit
(2.3.16 P.68)
Removing Panel Board
(2.3.5 P.44)
Removing Stacker Assy.
(2.3.6 P.45)
Removing Ink System
(2.3.18 P.71)
Removing PF Motor
(2.3.20 P.78)
Removing CR Motor
(2.3.10 P.54)
Removing Print Head
(2.3.12 P.56)
Removing APG Assy.
(2.3.11 P.55)
Removing Housing, Upper
(2.3.2 P.39)
Removing Porous Pad,
Paper Guide, Front
(2.3.4 P.43)