Color Inkjet Printer Service Manual
Table Of Contents
- EPSON Stylus Photo R300/R310
- TROUBLESHOOTING
- DISASSEMBLY AND ASSEMBLY
- 2.1 Overview
- 2.2 Caution regarding assembling/disassembling the printer mechanism, a·Yl|Z6±¬¨–‹šÒq¿GZ~YçlçXX
- 2.3 Disassembly
- 2.3.1 Removing Paper Support Assy.
- 2.3.2 Removing Housing, Upper
- 2.3.3 Removing Housing, Middle
- 2.3.4 Removing Porous Pad, Paper Guide, Front
- 2.3.5 Removing Panel Board
- 2.3.6 Removing Stacker Assy.
- 2.3.7 Removing Main Board
- 2.3.8 Removing ASF Assy.
- 2.3.9 Removing Holder, Shaft Assy.
- 2.3.10 Removing CR Motor
- 2.3.11 Removing APG Assy.
- 2.3.12 Removing Print Head
- 2.3.13 Removing Carriage Unit
- 2.3.14 Removing Paper Guide, Upper
- 2.3.15 Removing Printer Mechanism/ Housing, Lower
- 2.3.16 Removing Power Supply Unit
- 2.3.17 Removing CDR Guide Assy.
- 2.3.18 Removing Ink System
- 2.3.19 Removing Paper Guide, Front/Roller EJ Assy.
- 2.3.20 Removing PF Motor
- ADJUSTMENT
- 3.1 Adjustment Items and Overview
- 3.2 Adjustment by using adjustment program
- 3.2.1 Market Setting
- 3.2.2 USB ID Input
- 3.2.3 Head ID Input
- 3.2.4 Head Angular Adjustment
- 3.2.5 Bi-d Adjustment
- 3.2.6 PW Sensor Adjustment
- 3.2.7 First Dot Adjustment
- 3.2.8 Offset Input for CR Motor Calorific Limitation
- 3.2.9 A4 Normal Paper Print
- 3.2.10 A4 Photo Quality Inkjet Paper Print
- 3.2.11 A4 Photo Paper/ Glossy Photo Paper print
- 3.3 Adjustment Except Adjustment Program
- MAINTENANCE
- APPENDIX
Stylus Photo R300/R310 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 47
External View
Figure 2-16. Removing "Main Board" (2)
7. Remove the screws (x9) which secure "Shield Plate, M/B". Then, remove
"Shield Plate, M/B".
8. Remove the screws (x7) which secure "Main Board". Then, remove "Main
Board".
1
2
8
9
C.B.S 3x4 (4-6kgf•cm)
C.P. 3x4 (3-5kgf•cm)
C.B.S 3x6 (4-6kgf•cm)
3
4
5
6
7
C.B.S 3x4 (4-6kgf•cm)
C.P. 2.5x6
(3-5kgf•cm)
Shield Plate, M/B
1
2
3
4
5
6
7
C.B.S 3x6 (4-6kgf•cm)
C.B.S 3x10 (4-6kgf•cm)
Main Board
Reinstalling "Main Board"/"Shield Plate, M/B"
Screw in the order as shown in Figure 2-16.
Reinstalling "Housing, Support Slot Assy."
Match the dowels (x2) of "Housing, Support Slot Assy." and
the positioning holes of Shield Plate, M/B".
Screw in the order as shown in Figure 2-15.
Reinstalling "Panel FFC"
Make sure to match "Panel FFC" and the lateral face of
"Shield Plate, M/B" and then attach it to "Main Board
Assy." with a two-sided tape.
Figure 2-17. Mounting "Panel FFC"
Two-sided Tape
Positioning Point