Color Inkjet Printer Service Manual
Table Of Contents
- EPSON Stylus Photo R300/R310
- TROUBLESHOOTING
- DISASSEMBLY AND ASSEMBLY
- 2.1 Overview
- 2.2 Caution regarding assembling/disassembling the printer mechanism, a·Yl|Z6±¬¨–‹šÒq¿GZ~YçlçXX
- 2.3 Disassembly
- 2.3.1 Removing Paper Support Assy.
- 2.3.2 Removing Housing, Upper
- 2.3.3 Removing Housing, Middle
- 2.3.4 Removing Porous Pad, Paper Guide, Front
- 2.3.5 Removing Panel Board
- 2.3.6 Removing Stacker Assy.
- 2.3.7 Removing Main Board
- 2.3.8 Removing ASF Assy.
- 2.3.9 Removing Holder, Shaft Assy.
- 2.3.10 Removing CR Motor
- 2.3.11 Removing APG Assy.
- 2.3.12 Removing Print Head
- 2.3.13 Removing Carriage Unit
- 2.3.14 Removing Paper Guide, Upper
- 2.3.15 Removing Printer Mechanism/ Housing, Lower
- 2.3.16 Removing Power Supply Unit
- 2.3.17 Removing CDR Guide Assy.
- 2.3.18 Removing Ink System
- 2.3.19 Removing Paper Guide, Front/Roller EJ Assy.
- 2.3.20 Removing PF Motor
- ADJUSTMENT
- 3.1 Adjustment Items and Overview
- 3.2 Adjustment by using adjustment program
- 3.2.1 Market Setting
- 3.2.2 USB ID Input
- 3.2.3 Head ID Input
- 3.2.4 Head Angular Adjustment
- 3.2.5 Bi-d Adjustment
- 3.2.6 PW Sensor Adjustment
- 3.2.7 First Dot Adjustment
- 3.2.8 Offset Input for CR Motor Calorific Limitation
- 3.2.9 A4 Normal Paper Print
- 3.2.10 A4 Photo Quality Inkjet Paper Print
- 3.2.11 A4 Photo Paper/ Glossy Photo Paper print
- 3.3 Adjustment Except Adjustment Program
- MAINTENANCE
- APPENDIX
Stylus Photo R300/R310 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 58
External View
Figure 2-30. Removing "Carriage Unit" (2)
9. Remove the E ring, "Holder, Scale Right" and "Cam, CR, Right" from the
right side of "CR Guide Shaft".
10. Remove the screw which secures "Bushing, Parallel Adjust, Right", Then,
remove "Bushing, Parallel Adjust, Right".
11. Remove "Fixed Spring, CR Shaft, Right" from the hook of "Frame, Main".
Remove "Fixed Spring, CR Shaft, Right" from "CR Guide Shaft".
12. Remove the E ring, the flat washer and the leaf spring which secure "Holder,
Scale, Left".
13. Remove the E ring, the flat washer and the spring washer from the left side of
"CR Guide Shaft". Then, remove "Holder, Scale, Left"
14. Release "Cable, Head" from the hooks (x7) of "Holder, Shaft Assy.".
15. Slide "CR Guide Shaft" to the right and pull it out from "Cam, CR, left".
Then, remove "Carriage Unit" and "CR Guide Shaft" together.
16. Pull out "CR Guide Shaft" from "Carriage Unit".
Holder, Scale Left
E Ring
Flat Washer
Leaf Spring
E Ring
Flat Washer
Spring Washer
Holder, Scale, Right
E Ring
Cam, CR,
Right
Bushing,
Parallel
Adjust, Right
C.P.S (P4) 3x6
(6-8kgf•cm)
Fixed Spring,
CR Shaft,
Right
Hook
Cable, Head
Holder, Shaft
Assy.
Hooks
Cam, CR, Left
CR Guide Shaft
Hooks
CR Guide Shaft