User`s guide

7. Building SPEL+ Applications
7.2.5 Making copies of projects
Use the Copy Project command in the Project Menu to copy all of the files in the current
project to another disk drive or directory. You can also save the project under a different
name. This command is useful for making backups or for transferring a project to an
external media such as a USB memory key so that it can be loaded on another machine.
Use the Save As command in the Project Menu to save the current project under a different
name or drive and re-open it using the new name and location. This command is useful for
making a test version of a project without making changes to the original project.
7.2.6 Backing up a project
To make a backup copy of the current project, use the Copy Project command in the
Project Menu to copy the project to another disk drive. Typically you will want to copy
the project to a USB memory key.
To restore a project from the external media such as a USB memory key (or different hard
drive), open the target project, then use the Copy Project command to copy the project to
the original disk
7.2.7 Converting a simple mode project
A project created in Simple mode can be converted to Normal mode by opening it while
operating in Normal mode. However, once the project is transferred to Normal mode, it
cannot be used in Simple mode.
EPSON RC+ 5.0 (Ver.5.4) User's Guide Rev.4 191