User's Manual

Settings
Allows you to change the settings for the device.
❏ Communicates with external devices (Communication function)
U “Comm. Settings” on page 112
❏ Inverts the screen's display (Invert function)
U “Sys. Settings” on page 113
❏ Adjusts the screen's contrast (Adjust contrast function)
U “Sys. Settings” on page 113
❏ Turns on the light automatically when the screen changes (Auto Light function)
U “Sys. Settings” on page 113
❏ Sets an alarm (Alarm function)
U “Sys. Settings” on page 113
❏ Turns off operation tones (Operation Tones function)
U “Sys. Settings” on page 113
❏ Resets configuration information in the device's memory (Initialise function)
U “Sys. Settings” on page 113
Other features
❏ You can measure pitch and stride using the built-in stride sensor (SF-710/SF-510
only).
U “Educating Your Stride Sensor” on page 33
❏ You can skip GPS positioning if it is taking too long.
U “Skipping GPS positioning” on page 30
❏ You can take measurements without performing GPS positioning.
U “Indoor mode (SF-710/SF-510 only)” on page 31
❏ You can monitor, analyse, compare and share your recorded data using the
dedicated Web application "RUNSENSE View".
U “Data Management Using the Web Application (RUNSENSE View)” on
page 77
SF-710/510/310 User Manual
Introduction
5