User's Manual

Recording Laps
Automatically (AT Lap
Function)
When a time or distance set in advance is reached, laps
are recorded automatically.
Set the lap time or distance. You can set five times or
distances. However, only one setting can be used while
measuring.
Note:
By using the PC application (Run Connect), you can setup
AT Lap from your computer.
When setting up from your computer, you can set your
own time or distance to divide laps (SF-710 only).
U “Setting the AT Lap Function (SF-710 only)” on
page 94
Operation buttons
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
U “Specifying a GPS (GPS Positioning)” on
page 29
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
C
Select AT Lap.
Use C/D to select, and then press A.
D
Select an empty setting.
Use C/D to select, and then press A.
When this is already set, select one of SETTING
01 to 05.
SF-710/510/310 User Manual
Measure
54