User's Manual

E
Select an empty setting.
Use C/D to select, and then press A.
When Complete is displayed, press A.
Press C to resume measuring.
Note:
❏ You can register up to 40 waypoints.
❏ You can overwrite by selecting an item that
has already been registered.
Specifying and measuring
waypoints
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
U “Specifying a GPS (GPS Positioning)” on
page 29
B
Display the Measure set. menu.
Hold down B on the measurement screen.
C
Select Waypoint.
Use C/D to select, and then press A.
D
Select ON.
Use C/D to select, and then press A.
E
Select the registered waypoint.
Use C/D to select, and then press A.
F
Select OK.
Use C/D to select, and then press A.
SF-710/510/310 User Manual
Measure
60